Connect
To Top

Check Out Ashley Proctor’s Story

Today we’d like to introduce you to Ashley Proctor.

Hi Ashley, please kick things off for us with an introduction to yourself and your story.
Mr Hargrove graduated from high school in June of 1946 and went directly into the marines where he served until 1948. Mr. Hargrove and his father Earl, Sr. founded Hargrove Displays and as Mr. Hargrove quoted, “That’s when the fun really started”. Their company created store front window displays. Overtime, they went on to create parade floats for some of the nation’s largest celebrations, such as Presidential Inaugurals, Thanksgiving Day Parades, and more! The first Inaugural that was awarded to Hargrove Displays was for President Truman. On one particular day in 1949, President Elect Truman was taking a stroll down Pennsylvania Avenue, and walked past Mr. Hargrove’s father trimming a store window. President Elect Truman was so amazed by his work that he suggested that maybe he could create a parade float for his upcoming inaugural parade. Well, of course. This could be his big break and it was. Hargrove Displays has done floats for every Presidential Inaugural parade since. American Celebration opens its doors to the public. Mr. Hargrove loved parades and was a master at designing and creating them. He wanted to share everything that Hargrove Displays created with the public, so he created a one of a kind attraction to show off his work! Retired Military Veterans especially like to visit because of the sense of patriotism they feel here. Mr Hargrove passed away in 2015, and now his daughter Kathy Kelly has taken over ownership to keep the family legacy alive.

I’m sure it wasn’t obstacle-free, but would you say the journey has been fairly smooth so far?
It has not always been a smooth road. While Mr. Hargrove was considered the “President’s Propman”, when working on Inaugural floats and props, he had the pressure of time on his back. The president’s would be elected in November and the inauguration was in January, so they had about 2.5 months to create several props and parade floats. These aren’t parade floats that you see in your local parades, they are massive and the amount of detail that was put into the floats was amazing. He had the pressure of putting in the bid for the upcoming inaugural parade, so there was a lot of organization that went into the planning for this. Not only was that pressure there, but he also had to make sure the floats would make it to the parade! For example, one particular inaugural started off windy, snowy and rainy. The crew was busy getting parade floats assembled and ready for the inauguration the next day. Everything was going well, except for the Eagle float! The eagle body stood atop a self propelled float unit, and was driven down the assembly area. The crew needed to attach the head, tail, and two very large wings with the help from a crane that was on site. The head and tail went together just fine. Let’s just say the wings were a different story! They rigged one of the eagle’s wings to the crane, and lifted it up and set it onto the eagle body. That went alright other than the wind was rocking the eagle around. Then came the second wing. The wind was still blowing pretty hard, but the second wing was rigged to the crane and lifted into the air. The wing was lifted into the air and they had to pull and orient the wing to the right position to assemble. With the combination of the wind and the team trying to configure it just right, the wing let loose from the crane and dropped 20 feet to the hard and slushy asphalt below. Thankfully, no one was hurt, but the wing itself was damaged and bent up. At this point, it was around 11 PM. They assessed the damage and welded and repaired the best that they could. Once they fixed what they could, they re-lifted the wing with the crane and fought for hours through the night. Mr. Hargrove was with them the entire time. He stuck it out all through the night with the crew. It wasn’t until the secret service made him take a break and welcomed him into their private office trailer to warm up and sit down for a bit. They stayed up the entire night working on getting the eagle worthy of going through the parade, but it was still very windy. The Eagle was 30 feet tall, fully assembled, so there was a lot of surface area to catch wind. The Eagle would rock side to side. It proved to be too much of a concern for safety with the wind that it did not go through the Inaugural parade.

Another example was President Reagan’s second inaugural. The Flag Float was built for President Reagan’s second Inaugural. It was Mr. Hargrove’s pride and joy. He built it to look like it was waving in the wind. However, due to freezing conditions this parade was canceled which was the only one in history to be canceled. The President still wanted to greet all who were supposed to participate so they used the float as a backdrop in a local arena. They did the measuring to make sure that it would make it through the door and it looked like it would, but when they got to the arena, it was just a few inches too tall. That didn’t stop Mr. Hargrove. They made the decision to deflate the tires on the float just enough to get it through the door and reinflated them on the other side. The Flag Float also appeared in Obama’s first Inaugural Parade and it was the last float that Mr. Hargrove at the age of 80 drove.

Can you tell our readers more about what you do and what you think sets you apart from others?
Mr. Hargrove created parade floats and props for the Nation’s largest celebrations. He was known as the “President’s Propman” because anytime they needed something for a parade or large party, they went to Mr. Hargrove! He was most proud of the presidential inaugural floats.

So, before we go, how can our readers or others connect or collaborate with you? How can they support you?
The business doesn’t specialize in float building now, but people are welcome to visit the American Celebration on Parade museum to observe his work.

Pricing:

  • Tickets for the museum are $20 for adults and $10 for kids.
  • If they see Shenandoah Caverns, they can get into the building at a discounted rate.

Contact Info:

Black-and-white photograph of a large indoor fairground with amusement rides and people beneath a high, metal-beamed roof.

Person seated at a desk covered with papers in a wood-paneled room with framed pictures and lamps.

A man kneels beside a large animal wearing an elaborate costume in a barn, with another person and a sheep nearby.

Colorful train-shaped amusement ride with a large decorative lantern in an indoor venue.

Suggest a Story: VoyageVirginia is built on recommendations from the community; it’s how we uncover hidden gems, so if you or someone you know deserves recognition please let us know here.

Leave a Reply

Your email address will not be published. Required fields are marked *

More in Local Stories